REDARC 20A In-Vehicle DC Battery Charger (Ignition Control) (BCDC1220)
The REDARC BCDC1220-IGN is a multi-stage DC to DC dual battery charger which features technology capable of fully charging a lead acid auxiliary battery.
It’s designed for vehicles fitted with an ECU-controlled variable voltage alternator. The battery charger is designed to work with an operating range of 9-32V and gives the option for charging from either 12V or 24V vehicle systems.
LOW VOLTAGE SETTING
The BCDC1220-IGN has a lower voltage setting and will continue to operate with a low input voltage from the alternator. Should the voltage get too low, the unit acts as a dual battery isolator and protects the start battery.
BUILT TOUGH FOR ALL CONDITIONS
It’s compact in size and fully sealed to eliminate the risk of damage from dust, water, and vibration. It can handle the toughest trails and roughest terrains and can operate under extreme heat (up to 176°F). Plus, fan cooling makes for a quiet operation. The DC-DC battery charger, charges AGM, gel, calcium content, VRLA, and standard lead acid batteries. The BCDC range charges your auxiliary battery banks to 100% state of charge while on the move and on to your next great adventure.*
*large capacity battery banks may require a few cycles to fully charge.
| BATTERY CHEMISTRY | Standard Lead Acid, Calcium content, Gel, AGM or LiFePO4 type only |
|---|---|
| CONTINUOUS RATING | 12A |
| POWER TYPE - AC DC | DC TO DC |
| NOMINAL OUTPUT POWER | 149W (12V vehicle) / 294W (24V vehicle) |
| INPUT FUSE RATING | 17A to 23A (Not supplied) |
| BLUETOOTH COMPATIBLE | No |
| SUITABLE FOR 12V SYSTEMS | Yes |
| SUITABLE FOR 24V SYSTEMS | Yes |
| MPPT SOLAR REGULATOR | No |
| CABIN/ CANOPY INSTALL | Yes |
| NO LOAD CURRENT | <100mA |
| TRAILER INSTALL | Yes |
| ENGINE BAY INSTALL | Yes |
| MAX. CHARGING VOLTAGE | 15.3V |
| OUTPUT FUSE RATING | 32A (Not supplied) |
| OPERATING TEMPERATURE | -4°F to 176°F |
| OUTPUT VOLTAGE | 12V DC |
| MAX. RATED OUTPUT CURRENT | 11A (12V vehicle) / 20A (24V vehicle) |
| INPUT VOLTAGE | 9 - 32V |
| STANDBY CURRENT | <5mA |
| CONNECTOR TYPE | Bare wire |
| WEIGHT | 30 oz (450 g) |
| WIDTH | 4.7" (120 mm) |
| HEIGHT | 1.5" (37 mm) |
| DEPTH | LENGTH | 3.9" (100 mm) |