3rd Gen 4Runner
Terrain Tamer CV Shaft Assembly - 1996-2002 4Runner & 90 Series Prado (43430-35030TT)
CV Joint & Drive Shaft for Toyota Part number: 43430-35030
Terrain Tamer Toolings
Original Equipment Manufacturer
Fits 3rd gen Toyota 4Runner 1996-2002, Prado 90 series.
The product is one unit only. If want to service both sides, please order 2 units.
$588.49
Magnuson Supercharger For Toyota 5VZ-FE 3.4L V6 - MP62
Give your 4Runner, 100 and Tundra’s 5VZ-FE V6 the power it deserves with the Magnuson MP62 Supercharger System. Delivering a 25% increase in both horsepower and torque to the crank, giving you the power to have fun offroad, haul that heavy load...
$6,187.50
Terrain Tamer Front Shock Top Hat - 1996-2002 4Runner & 90 Series Prado (48609-35030TT)
Fits
1996-2002 Toyota 4Runner
1996-1999 90 & 95 Series Land Cruiser Prado
$121.99
Terrain Tamer Front Swaybar End Link - 1996-2002 4Runner, 2000 Tundra & 90 Series Prado (48820-35030TT)
Fits 3rd Gen Toyota 4Runner, Prado 90 series.
$73.86
SPC Rear Lower Track Bar Replacement Bushing for 1996-2002 4Runner (16115)
Replace worn track bar bushings on your 1996 through 2002 Toyota 4Runner with this replacement bushing from SPC. Sold each, use up to two bushings on your vehicle. Need to adjust your rear track? Consider replacing your track bar instead...
$54.99
SPC Front Upper Control Arms for 1998-2004 Tacoma & 1996-2002 4Runner (25460)
25460 - TACOMA UCAS (PAIR) Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring a new maintenance free ball joint and xAxis™ bushings, this...
$1,524.99
Dobinsons IMS Rear Shocks for 1995 - 2002 4Runner 0-2.5" Lift - (IMS59-50225)
Dobinsons Rear IMS Shocks for Toyota 4Runner 3rd gen 1995-2002 0-2.5" of Lift, using original springs or Dobinsons springs. Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilising...
$874.99
$449.99
-
Factory Crush Sleeve
-
With Solid Spacer
Terrain Tamer Rear Differential Overhaul Kit - 70 Series Land Cruiser, 90/95/120 Series Prado and 1990-2009 4Runner
- Factory Crush Sleeve
Terrain Tamer Rear Differential Overhaul Kit Fit 70 Series Land Cruiser, 90/95/120 Series Prado and 1990-2009 4Runner A differential kit, also known as a 4x4 diff rebuild kit or differential repair kit, is a set of parts used to repair...
$449.99
-
Factory Crush Sleeve
-
With Solid Spacer
Terrain Tamer Front Coil Springs Standard Height Up to 50KG - 1996-2002 4Runner & 90 Series Prado (TTCS-1443)
Australian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only. As the driver turns or changes lanes, the progressive...
$442.99
$442.99
Terrain Tamer Rear Coil Springs 40mm Up to 50KG - 1996-2002 4Runner & 90 Series Prado (TTCS-1405)
Australian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only. As the driver turns or changes lanes, the progressive...
$442.99
Nitro Gear & Axle Ring & Pinion 8" 4.30 Ratio 29 Spline
Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford and Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps...
$524.95
Nitro Gear & Axle Ring & Pinion 8" 4.88 Ratio 29 Spline
Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford and Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps...
$464.95
Nitro Gear & Axle Ring & Pinion 8" 5.29 Ratio 29 Spline
Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford and Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps...
$494.95
Nitro Gear & Axle Ring & Pinion 8" 5.71 Ratio 29 Spline
Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford and Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps...
$464.95
Nitro Gear & Axle Ring & Pinion 8" 4.11 Ratio 29 Spline
Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford and Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps...
$464.95
Nitro Gear & Axle Ring & Pinion 8" 4.56 Ratio 29 Spline
Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford and Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps...
$464.95