C4 Fabrication
C4 Fabrication Engine Bay Accessory Tray (Driver Side) for 2010+ 4Runner
Useful for mounting fuse blocks, S-Pods or Blue Sea accessories for dual battery setups. Attaches on driver side of engine bay between fuse box and brake master cylinder. Easy installation only takes a few minutes. Mounting bolts are provided with...
$94.99
C4 Fabrication Windshield Washer Tank - 2010+ 4Runner
2010+ 4Runner Windshield Washer Reservoir Skid Protects windshield washer reservoir from road and trail debris when exposed with aftermarket bumpers Works with C4 Hybrid, Overland, and Lo-Pro with High Clearance Additions Made from 14ga P&O steel 100% Bolt-On **SPECIAL ORDER**...
$169.99
C4 Fabrication Spare Battery Tray (Passenger Side) - 2010+ 4Runner
Dimensions: 13x9x9 Weight: 7lbs Ships Bare Steel Finish (we do not offer powder coat) Max Battery Size – Length: 11″ Width: 7″ Height: 9″ **SPECIAL ORDER** THIS PRODUCT HAS A LEAD TIME OF 16 WEEKS AND ADDITIONAL SHIPPING CHARGES MAY...
$339.99
C4 Fabrication Lo-Pro Bed Bars - 2005+ Tacoma
Works on 05+ Tacoma bed rails Bed bars can be adjusted front to back to accommodate spacing requirements for different accessories. Mounting brackets use factory t-slots on bedsides for a quick and easy installation. Brackets also sit on top of...
$529.99
C4 Fabrication Front Bumper Frame Supper Brackets - 2016+ Tacoma
2016+ (3rd Gen) Tacoma Front Bumper Frame Support Brackets Fits 2016 and up Tacoma Sold as a pair, left and right side. Adds extra support to the factory bumper mounting locations for extreme winching and pulling situations. Made from 3/16″...
$339.99
C4 Fabrication Mid Height Bed Rack - 2016+ Tacoma
Top of bed bars sit 10″ above bedsides. Bed bars can be adjusted front to back to accommodate spacing requirements for different accessories. Mounting brackets use factory t-slots on bedsides for a quick and easy installation. Brackets also sit on...
$854.99
C4 Fabrication Front Lo-Pro Winch Bumper - 2016+ Tacoma
ALL BUMPERS NOW COME WITH THE “C4” LOGO CUT INTO THE LIGHT BAR CUTOUT AREA. The “C4” logo will still be cut in that location if “no cutout” is selected under light bar cutout options. “C4 Fab” will no longer be...
$1,689.99
C4 Fabrication Rock Sliders - 2016+ Tacoma
2016+ Tacoma Rock Sliders Fits Access cab long bed, double cab short bed and double cab long bed. 100% Bolt-on application for easy installation. Drilling holes in the bottom of the frame to install additional included hardware is recommended to...
$2,439.99
C4 Fabrication Overland Series High Clearance Rear Bumper - 2016+ Tacoma
This bumper requires cutting of the side panels, Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper. Lower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper...
$4,559.99
C4 Fabrication Rear Differential Skid Plate - 2016+ Tacoma
2016+ Tacoma Rear Differential Skid Plate Fits all Tacoma models with 8.75" differential Fits TRD Offroad and TRD Pro models; Does NOT fit TRD Sport or SR5 Fits all manual transmissions Works with E-locker equipped differentials. Diff skid extends forward far enough...
$629.99
C4 Fabrication Fuel Tank Skid Plate - 2016+ Tacoma
2016+ Tacoma Fuel Tank Skid Plate 100% bolt on design Made from 3/16″ CNC cut steel plate All mounting hardware included Easy installation Skid mounts to the frame on both the front and rear for increased strength and resistance to...
$904.99
C4 Fabrication Rear Skid Plates - 2005+ Tacoma
2005+ Tacoma Rear Skid Plates Protects transmission, transfer case and exhaust (including catalytic converters) Includes a unique bolt-in crossmember for maximum strength and protection for the transfer case Available without the exhaust clearance drop for Tacomas with exhaust reroute (flat fill...
$1,234.99
C4 Fabrication Front Skid Plate - 2005+ Tacoma
2005+ Tacoma Front Skid Plate Wide coverage to help protect vital engine components Made from 3/16" CNC cut steel 100% Bolt-On design Oil Drain and Oil Filter Covers allow for easy oil changes without removing the skid plates Works with...
$1,234.99
C4 Fabrication Full Skid Plates 2005+ Tacoma
2005+ Tacoma Full Skid Plates Wide coverage to help protect vital engine components Three separate skid plates that bolt together to protect the engine, transmission, and transfer case Available without the exhaust clearance drop for Tacomas with exhaust reroute (flat...
$2,279.99
C4 Fabrication Overland Rear Bumper - 2016+ Tacoma
The 2016+ Tacoma Overland Series Rear Bumper Easy installation, 100% bolt on, no cutting or welding required. Integrated receiver hitch for maximum clearance. Allows for a much better departure angle because of the low profile design and integrated hitch. Not...
$2,849.99
C4 Fabrication Hybrid Front Bumper - 2016+ Tacoma
2016+ Tacoma (3rd Gen) Hybrid Front Bumper, Requires cutting of the plastic bumper to install. Fits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some...
$2,764.99
C4 Fabrication Overland Front Bumper - 2016+ Tacoma
2016+ Tacoma (3rd Gen) Overland Front Bumper, Requires cutting of the plastic bumper to install. Fits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some...
$3,054.99
C4 Fabrication Swing Arm Ham Antenna Bracket
Ham antenna bracket bolts onto C4 rear bumper swing arms
No drilling required
Hardware included
**SPECIAL ORDER** THIS PRODUCT HAS A LEAD TIME OF UP TO 16 WEEKS
$49.99
C4 Fabrication Horizontal Hi-Lift Bracket
Horizontal Hi-Lift Bracket
Bolts onto C4 rear bumper single swing arms
No drilling required
Hardware included
**SPECIAL ORDER** THIS PRODUCT HAS A LEAD TIME OF 16 WEEKS AND ADDITIONAL SHIPPING CHARGES MAY APPLY
$169.99
C4 Fabrication Vertical Hi-Lift Bracket
Vertical Hi-Lift Mount
Bolts onto C4 rear bumper swing arms
No drilling required
Hardware included
**SPECIAL ORDER** THIS PRODUCT HAS A LEAD TIME OF 16 WEEKS AND ADDITIONAL SHIPPING CHARGES MAY APPLY
$189.99
$284.99
C4 Fabrication Backup Camera Relocation Kit for 2010+ 4Runner, 2012+ Tacoma & 2014-2021 Tundra
DIY wiring kit with mount for Toyota backup camera. Works with: 2010-current 4runner camera 2012-current Tacoma camera 2014-current Tundra camera This kit is not a direct “plug and play” kit. It requires cutting original camera wiring harness and splicing in...
$284.99
C4 Fabrication Summit Hatch Ladder Rotopax Mount Bracket
Use this bracket to attach a Rotopax brand mount to your Summit Ladder. Bracket comes powder coated black and contains hardware to attach bracket to the ladder. Rotopax brand mount is needed to attach Rotopax container to this bracket. Up...
$89.99
C4 Fabrication Summit Hatch Ladder Side Step
Additional side step to bolt on to your Summit Hatch Ladder.
Each step comes with hardware to attach the step to the ladder.
Side steps are powder coated black.
$114.99
C4 Fabrication Fuel Tank Skid Plate for 2010+ 4Runner
100% bolt on design Made from 3/16″ P&O steel plate All mounting hardware included Easy installation Archways cut into sides of skid plate to allow drainage Solid plate bottom for strength and protection 62 lbs Ships bare steel, powder coat...
$904.99