Dobinsons

High Quality Polyurethane, maintains height over time Perfect fit on top of OE isolator Sold as 1 piece Lasts longer than rubber Easy to add lift height to correct for vehicle lean

Vehicle Fitment Isuzu D-Max 2nd gen - 3.5" 110-175lb Load Toyota FJ Cruiser 2010-2017 - 2.5" - With 110-220LBS load Toyota 4Runner 4th Gen V6 - 2.5" - With 110-220LBS load Toyota 4Runner 4th Gen V8 - 2.5" Stock Load...

Dobinsons Spring & Suspension 5° Caster Plate kit for the Toyota Land Cruiser 80 series from 1990 to 1997 and 105 series from 1998 to 2006, used when vehicle lift height is 5" to 7". With that amount of lift,...

For any lift height, or no lift. These are OE replacement bushings. Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings Pressing of OE bushings may be necessary during removal and installation Replaces OE bushings...

Fully Designed, Manufactured, and Finished In Australia Ultra modern design technology, Fully Scragged & Load Tested State of the Art Heat Treatment, High Intensity Shot Peened Formed on Precision Mandrels, Precise End Configurations Durable Powder Coat Finish 2003 - 2009...

This part number replaces C59-748R, This is a new and improved design.  Fully Designed, Manufactured, and Finished In Australia Ultra modern design technology, Fully Scragged & Load Tested State of the Art Heat Treatment, High Intensity Shot Peened Formed on...

Dobinsons front differential drop kit for 2005-16 Toyota Tacoma and , 2003-2016 4Runner, 2007-15 FJ Cruiser, This is needed when lifting these IFS vehicles more than 2.0", as it rotates down the front side of the differential carrier to help...

Dobinsons Big Bore Steering Damper for all Toyota Land Cruisers with a solid front axle, including 60, 61, 62, 70, 71, 73, 74, 75, and 80 series from 1980-1997.  Induction Hardened Rods for strength, no Viscosity Drop due to High...

Fully Designed, Manufactured, and Finished In Australia Ultra modern design technology, Fully Scragged & Load Tested State of the Art Heat Treatment, High Intensity Shot Peened Formed on Precision Mandrels, Precise End Configurations Durable Powder Coat Finish 730LB/IN Spring Rate...

Made from the highest quality raw materials to give years of life under the harshest conditions Over 60 years of leaf spring design and manufacturing Kit includes 2 greasable bolts, as shown in the photo Order 2 kits if you...

The C59-210V are Front Progressive / Variable rate coils (stock height) with no additional accessory weight on the front of the vehicle, such as a replacement bumper or winch.  Fully Designed, Manufactured, and Finished In Australia Ultra modern design technology,...

The C59-222V are Front Progressive / Variable rate coils to give a 2" lift with 110-220 LBS of additional accessory weight on the front of the vehicle, such as a replacement bumper and winch. Fully Designed, Manufactured, and Finished In...

Made specifically for the 4x4 Toyota Tacoma 2005-21, 4Runner 2003-21, Toyota FJ Cruiser (all years) Dobinsons have a range of coil Strut Top Caps available for most popular 4×4 models. These can be used to replace the original worn strut...

Complete kit for both left and right hand side, includes new ball joints (not assembled), OE style rubber frame bushings (installed), and washers Has 3 degrees of caster built in, no adjustability or settings required Made from HSLA (High Strength...

Fully Designed, Manufactured, and Finished In Australia Ultra modern design technology, Fully Scragged & Load Tested State of the Art Heat Treatment, High Intensity Shot Peened Formed on Precision Mandrels, Precise End Configurations Durable Powder Coat Finish Works with KDSS...

Simple bolt-in design High quality steel base, powder coated, with all proper grade hardware OE quality upper rubber coil isolators with built-in bump stops All inclusive kit, nothing else is needed except for suitable coil springs Adds 1/2" of lift ...

Made from the highest quality raw materials to give years of life under the harshest conditions Over 60 years of leaf spring design and manufacturing Design features include Drawn, tapered and thinned leaf ends Manufactured to international quality standards ISO9001:2008...

Vehicle Fitment Toyota Tundra 1st Gen Toyota Tacoma 2nd Gen Toyota Tacoma 3rd Gen Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade) Superior Design, thicker walls, longer travel Japanese NOK Multi-Lip seals, Fuchs German shock absorber...

Fully Designed, Manufactured, and Finished In Australia Ultra modern design technology, Fully Scragged & Load Tested State of the Art Heat Treatment, High Intensity Shot Peened Formed on Precision Mandrels, Precise End Configurations Durable Powder Coat Finish 2003 - 2009...

Fully Designed, Manufactured, and Finished In Australia Ultra modern design technology, Fully Scragged & Load Tested State of the Art Heat Treatment, High Intensity Shot Peened Formed on Precision Mandrels, Precise End Configurations Durable Powder Coat Finish 2003 - 2009...

Vehicle Fitment Isuzu D-Max 2nd gen - 3.5" 110lb Load - 3" 120-220lb Load Isuzu D-Max 3rd Gen - 1.5" Stock Load Toyota FJ Cruiser - 2.5" Up to 110lb Load Toyota 4Runner 4th Gen V6 - 2.5" Stock Load...

Dobinsons offer this 1/4" black anodized alloy strut spacer, to fit between the strut mount and the tower of the vehicle.  These are primarily used to correct for vehicle lean, most commonly added to the US driver's side when it...

3.0" Lift Long Travel Variable Rate Rear coils - Toyota 4Runner 2003 to 2021 with 700-800LBS+ Constant Accessory Load.  Your vehicle MUST have at least 700-800LBS of constant rear accessory weight (bumper, tire carrier, roof rack, drawers, fridge, etc), otherwise your vehicle...

Long Travel, maximum flex variable rate tapered coils from Dobinsons, Available in 2.5" Medium Load and 3.5" Heavy Load, choose above. Requires additional suspension parts for maximum travel, for offroad use only. Use with Dobinsons long travel shocks for maximum...